This automatic transfer switch allows on-off control of devices such as generators.
An ATS (automatic transfer switch) is used to change the power source to a secondary source, usually a generator, in case of power failure. When there is a failure of the primary power source the ATS automatically starts the generator and switches the input power to the generator. When the primary power source is restored the ATS resets the primary input.
Note: Your generator requires an ATS socket to operate this switch.
Maximum power output: 5.5kW
Maximum current: 21A
Transfer delay time: 2-5 seconds
Return delay: 10 - 20 seconds
Connections: Generator monitor 5 pin connector
Dimensions: W 28cm x D 28cm H 22cm
Our friendly and knowledgeable gurus are trained to answer all your questions as quickly as possible. So if there’s anything you need to know just give us a call during business hours, or send us an email any time.