✔ FREE ProVIS 30 1L Engine Oil worth $14.90, limited time.
Break down your garden waste quickly and easily with this quality wood chipper from Hyundai.
With a heavy-duty 196cc 4-stroke engine powering a low-maintenance direct-drive blade, it makes short work of small to medium branches up to 30mm in diameter depending on type and hardness of the wood - keep in mind that dry hardwoods such as manuka and mapou will need to be significantly smaller to chip effectively.
If you've been using a domestic electric shredder to handle your garden waste, this this is the step up you've been looking for. Thanks to its efficient self-feeding action, it’s simple to use - just feed in branches and twigs into the wide mouth hopper and watch as the extended discharge spreads valuable mulch to your desired location.
The precision HSS blades and hardened steel anvil cut clean and fast, while the integrated handle make it easy to move around your property.
So whether you're tidying up from a heavy prune or overcoming some thick scrub, this unit will take care of it with ease. Order yours today.
• Perfect for tidying up after a heavy prune
• Branch capacity up to 30mm diameter (depending on material)
• Wide mouth feed hopper easily removable for blockage clearance
• Efficient self-feeding action
• Tough 6.5hp 4-stroke engine
• Emergency stop button
• Easy starting
• HSS blades for clean, efficient cutting
• 2 Year Warranty
Engine Type: single cylinder OHV 4-stroke
Engine Size: 196cc
Oil Capacity: 0.6L (15W-40)
Noise Level: 108 dB (A)
Power: 6.5hp @3600rpm
Fuel Type: Unleaded Petrol
Fuel Tank Capacity: 3.6L
Wheel Type: Solid
Drive Type: Direct
Max Chipping Size: 30mm
Blade width: 70mm
Hopper opening size: 25cm x 25cm
Performance: 500 – 2000 kg/hr
Disc Speed: 3600rpm
Dimensions: L 90cm x W 40 x H 105cm
Carton size: 95cm x 55cm x 40cm
Good wood chipper
about 1 year ago2019-08-06T21:15:31+00:00
You learn your ways around not blocking this chipper with too bulky branches or too soft plant material. After you mastered that, it gave me 5 huge bags of beautiful chips used in my garden for raised garden beds or just to empty on my slippery clay ground.
DO NOT BUY
about 1 year ago2019-07-27T20:13:37+00:00
Don’t be fooled by the Brand name “Hyundai” this product is not worthy of it. Very poor design which blocks up during use and then takes a long time to unblock. Will definitely not chip branches up to the specified diameter.
Great Value Home Chipper
about 1 year ago2019-05-15T19:57:48+00:00
I put this together easily and ran great first time. Only thing is it chips a lot smaller than I expected! Great value and trimming trees and shrubs around my 1/4 acre is a breeze. Have only used fresh branches as suggested. Overall great value and use!!
about 1 year ago2019-05-05T22:02:37+00:00
It took about 1/2 an hour for 2 person to assemble the machine as it is quite heavy on some part. Top the engine oil (need funnel to fill) and petrol. Need to pull couple of times to start and it went well. Finish chipping big mount of prunnings in shortter time than I expected.
Hyundai Wood Chipper 6.5hp
about 1 year ago2019-04-30T19:39:03+00:00
Great little chipper.. i put a whole grapefruit tree through it and an orange tree.. no problem cut into straight lengths. No fruit though as clogs it. I've now got a 15hp belt drive chipper and that goes real well.. keep the knives sharp and they will chip relentlessly as fast as you can feed them. Great machine
Great value chipper
over 2 years ago2018-12-07T08:09:34+00:00
Went first pop out of the box and handles branches up to 50-60mm with ease. Branches need to be fairly straight so a bit of prep is needed and it cuts green branches better than dry ones. Overall is excellent value.
over 2 years ago2018-10-18T18:31:48+00:00
Pretty easy to assemble (wiring not shown for kill switch, fortunately my guess was right). Will do the job as intended - you just have to cut your branches up pretty small to get them through (it can't handle things that aren't pretty straight). Makes easy work of fresh green gum branches, a little more work on dried ones (answer shred immediately, not a month later).
over 2 years ago2018-10-18T12:49:03+00:00
Machine arrived, and went together easily. One minor issue was a new upgrade on the machine, that was not included in the assembly manual. Very quickly & easily sorted by support staff, and the machine was ready to go. Then, a first. A brand new engine, and it started on the VERY FIRST PULL !! Impressed !!