✔ FREE ProVIS 15W/40 5L Engine Oil worth $49.90, limited time.
Chew through large amounts of garden waste quickly and easily with this powerful, mobile wood chipper from Hyundai.
Built to make chipping easy, the workhorse 420cc 4-stroke motor powers a rotating blade and anvil mechanism, that not only rips through your garden waste but gives this chipper a self-feeding action for maximum work with minimum effort. This model features electric starting for even simpler operation - just fuel up and turn the key.
Munch through branches up to 70-100mm in diameter depending on type and hardness of the wood, keeping in mind that dry hardwoods such as manuka and mapou will need to be significantly smaller to chip effectively.
Built tough with all steel construction, this is a heavy-duty machine, but is easy to manoeuvre with its twin hopper handles, large diameter, extra wide pneumatic tyres. It’s also a great option for larger properties thanks to the included 50mm tow bar mount (off-road use only), so you can take it to where the work is. The hopper is hinged for easy blockage clearance, while the extended, adjustable discharge chute is especially handy for feeding directly onto a trailer, ute deck or wheelbarrow.
The precision HSS blades and hardened steel anvil cut clean and fast, while the twin v-belt drive design gives smooth running, better shock load protection and simple servicing.
Suitable for larger properties and frequent use, this machine is capable of chipping and shredding large quantities of wood and branches into easily handled chippings quickly and effortlessly.
Order today and take the effort out of maintaining your property.
• Branch capacity up to 70-100mm diameter (depending on type and hardness of the wood)
• 50mm tow bar hitch for greater mobility (off-road use only)
• Electric start
• Wide mouth feed hopper is hinged for easy blockage clearance
• Extended discharge chute - feed directly onto a trailer, ute or wheelbarrow
• Efficient self-feeding action
• Tough 15hp 4-stroke engine
• Emergency stop button
• Easy starting
• HSS blades and hardened steel anvil for clean, efficient cutting
• Belt driven for easy servicing
• Pneumatic tyres
• 2 Year Warranty
Engine Type: Single cylinder OHV 4-stroke
Engine Size: 420cc
Oil Capacity: 1.1L
Noise Level: 108 dB (A)
Power: 15hp @ 3600
Fuel Type: Unleaded Petrol
Fuel Tank Capacity: 6.5L
Wheel Type: Pneumatic
Drive Type: Twin V Belt in Parallel
Max Chipping Size: 70-100mm
Blade width: 308mm
Hopper opening size: 44cm x 38cm
Performance: 1000 – 5500 kg/hr
Disc Speed: 2350rpm
Dimensions: L 111cm x W 63cm x H 112cm
Carton dimensions: 113cm x 65 x 115
I've had this machine for about a month and it has gobbled up everything I've thrown at it on my lifestyle block. I doesn't get blocked on flax or cabbage tree leaves, it tends to spit them out whole. It copes with pretty big branches, green and dry, I just feed them through more slowly, though it doesn't breakdown smaller hedge clippings much. I did feed too much in which caused a blockage but followed the directions in the manual and cleared it without problem. My neighbour has borrowed it and is thinking of getting one for himself. It is very loud so I use ear plugs as well as ear defenders. It feels like a machine that if I treat it well will keep doing the job for ever, unlike the little electric one I bought from a DIY shop that broke within half an hour.
Really happy with my purchase so far. 12+ hours of use so far chipping feijoa and bamboo. Still running fine. Heavy to move by hand and need to be careful on sloped ground. Loving using the munch as the byproduct. Only minus is the red emergency button on top of shoot has stopped working.
The chipper arrived well packaged, and building it was fairly straightforward. I like the fact you get all the tools required and even a little toolbox to store them in permanently. Apart from being hard to start sometimes (usually due to it being easy to flood), this chipper has been going well so far. Although it is powerful enough to chip up to 100mm branches, it will only cope with large thickness branches for a short period. If the branch is long and thick the chipper blade cylinder loses momentum and the engine will stall. But putting through heaps of smaller branches (30-50mm) one after the other is fine. Leaves don't seem to get chopped up, but the wood of the branches is chopped down to chips less than a cm.
This machine is a great little workhorse. I ordered a similar one from another NZ company and had to send it back. This chipper does what it should and has been great for our needs. The electric start is great.
Bigger than it looks in photo and took 3 to assemble. Did what it’s meant to chopping through 2 sq metres pruning in 15 mins. Easy clean and remove any blockage. You’ll need plenty of storage space in your garage.