Makita 18V Job Site 6 Piece Brushless LXT 5.0Ah Kit

Roll up to your next job site with this big bag of tricks. Big 5.0Ah LXT Li-ion batteries (x2) power a suite of premium brushless tools, all ready to go in a handy carry bag - check out the specs.

DLX6097T Job Site Kit includes: DHP481 Cordless Brushless Hammer Drill, DTD171 Cordless Brushless Impact Driver, DGA504 Cordless Brushless Angle Grinder, DHS660 Cordless Brushless Circular Saw, DJR187 Cordless Brushless Reciprocating Saw ,DML815 LED Torch 160 Lumens, 2 x 5.0Ah batteries (BL1850), Charger (DC18RC), Tool Bag (831278-2)

DHP481 18V LXT 13mm Cordless Brushless Hammer Drill Driver

FEATURES
• 125Nm Max lock torque delivers unbeatable power
• 0-31,500 IPM for fast hammer drilling in masonry materials
• Mechanical 2 speed gearing with all metal gear construction
• 21 Clutch settings and drill mode for added fastening control
• Variable speed and reverse
• 3-Stage LED gauge indicates battery charge level
• 13mm single sleeve keyless chuck
• Extreme Protection Technology (XPT)
• 5 Year Makita Warranty

SPECIFICATIONS
Voltage: 18V
Drilling capacities
Steel:13mm (1/2")
Wood: 76 mm (3")
Concrete: 16 mm (5/8")
Impacts per minute
Hi: 31,500ipm
Lo: 8,250ipm
No load speed
Hi: 2,100rpm
Lo: 550rpm
Max fastening torque: 115Nm (max lock torque 125Nm)
Max torque: 125 Nm
Overall dimensions: 205 x 79 x 249 mm
Net weight: 2.4kg

DTD171 18V LXT Brushless Cordless 4-Stage Impact Driver

FEATURES
• 4 stages of impact selection plus two T-modes, A-mode and bolt mode
• On the go single hand impact selection button
• Impressive 180Nm of max. fastening torque
• XPT technology enhances dust and moisture protection
• Ultra compact design with twin dual side LEDs
• Included accessories: Belt clip (346317-0)
• 5 Year Makita Warranty

SPECIFICATIONS
Voltage: 18V
Capacities: 6.35mm (1/4") Hex
Standard bolt: 5-M16
High tensile bolt: M5-M14
Max fastening torque: 180Nm
Impacts per minute
Max.: 0 - 3,800ipm / Hard: 0 - 3,600ipm / Med: 0
No Load Speed
Max.: 0 - 3,600rpm / Hard: 0 - 3,200rpm / Med: 0
Overall height: 116mm
Net weight: 1.0kg skin

DGA504 18V Brushless 125mm Slide Switch Angle Grinder

FEATURES
• Kickback detection, anti-restart and soft start
• Automatic Torque Drive increases torque to power through any cut
• Extreme performance with 8,500rpm no load speed
• XPT technology that protects against dust & moisture
• Electronic current limiter
• Included accessories: 125mm Grinding Disc, Side Grip (153489-2), Tool-less Guard (123098-1) and Lock Nut Wrench (782407-9)
• 5 Year Makita Warranty

SPECIFICATIONS
Voltage: 18V
Maximum capacities
Depressed centre wheel: 125mm
Cut-off disc: 125mm
Sanding disc: 125mm
No load speed: 8,500rpm
Overall length: 362mm
Net weight: 2.5kg

DHS660 18V 165mm Brushless Circular Saw

FEATURES
• 1,000+ Cross Cuts in 4 x2 Pine Timber using 1 x 6.0Ah Battery
• Max cut capacity of 57mm with up to 50‎° bevel capacity
• Automatic Torque Drive increases torque to power through any cut
• High cutting performance with up to 5,000rpm no load speed
• Electric brake for added safety
• Twin LED job light
• Included accessories: Efficut 165mm 25T Blade (B-62991), Rear Dust Nozzle set for both DHS660 & DHS661 (199230-9)
• 5 Year Makita Warranty

SPECIFICATIONS
Voltage: 18V
Blade diameter: 165mm
Max cutting capacities
At 90°: 57mm
At 45°: 41mm
No load speed : 5,000rpm
Overall dimensions: 270mm
Net weight: 2.9-3.2kg

DJR187 18V Brushless Reciprocating Saw

FEATURES
• 32mm stroke with a cutting capacity of 255mm in wood
• Newly designed vertical crank mechanism reduces vibration
• High performance 3,000spm no load speed
• Rafter hanging hook for added convenience
• XPT technology that protects against dust & moisture
• Included accessories: (B-05169) 152mm /6" For Metal 18TPI and (B-05175) 152mm /6" For Wood/Nail Embedded 6 TPI
• Makita 5 Year Warranty

SPECIFICATIONS
Voltage: 18V
Capacities
Wood: 255mm
Pipe: 130mm
Length of stroke: 32mm
Strokes per minute: 0-3,000spm
Overall dimensions: 439mm
Net weight: 3.4kg

DML815 18V / 14.4V LXT LED Torch 160 Lumens

FEATURES
• 12 Position pivoting flashlight head swivels from 0º - 170º degrees
• 54hrs of continuous illumination/runtime on a 6.0Ah battery
• 4x 0.5W LEDs provide brightness of 160 lumens
• Compact and ergonomic design at only 272 mm long
• Included accessories: Strap Hook
• 5 Year Makita Warranty

SPECIFICATIONS
Voltage: 18V
Illuminance: 1m - 3,000lx
Overall dimensions: 272mm
Net weight:0.3kg

Product Code: DLX6097T