Roll up to your next job site with this big bag of tricks. Big 5.0Ah LXT Li-ion batteries (x2) power a suite of premium brushless tools, all ready to go in a handy carry bag - check out the specs.
Roll up to your next job site with this big bag of tricks. Big 5.0Ah LXT Li-ion batteries (x2) power a suite of premium brushless tools, all ready to go in a handy carry bag - check out the specs.
DLX6111TX1 Combo Kit includes: DHP486 Brushless Cordless Hammer Drill Driver, DTD171 Cordless Brushless Impact Driver, DGA504 Cordless Brushless Angle Grinder, DHS660 Cordless Brushless Circular Saw, DJR187 Cordless Brushless Reciprocating Saw ,DML815 LED Torch 160 Lumens, 2 x 5.0Ah batteries (BL1850), Charger (DC18RC), Tool Bag (199936-9)
DHP486 18V 5.0Ah Brushless Cordless Hammer Drill Driver
FEATURES
• Durable aluminium gear housing
• Mechanical 2 speed gearing with all metal gear construction
• High powered Brushless Motor produces 141Nm peak torque
• XPT technology that protects against dust & moisture
• Twin LED Job light with after-glow function
• 5 Year Warranty if registered within 30 days via MyMakita, 3 Year Warranty on non-registered or post 30 days
SPECIFICATIONS
Voltage: 18V
Drilling capacities:
Holesaw: 152mm
- Steel 13mm
- Wood 76mm
- Concrete 16mm
Impacts per minute:
- Hi: 0 - 31,500ipm
- Lo: 0 - 8,250ipm
No load speed:
- Hi 0 - 2,100rpm
- Lo 0 - 550rpm
Max fastening torque: 125Nm
Max torque: 125Nm
Overall dimensions: W 178mm x D 81mm x H 248mm
Net weight: 1.65kg
Continuous rating input: 680W
LXT battery compatibility: 1.5Ah 3Ah 4Ah 5Ah 6Ah
DTD171 18V LXT Brushless Cordless 4-Stage Impact Driver
FEATURES
• 4 stages of impact selection plus two T-modes, A-mode and bolt mode
• On the go single hand impact selection button
• Impressive 180Nm of max. fastening torque
• XPT technology enhances dust and moisture protection
• Ultra compact design with twin dual side LEDs
• Included accessories: Belt clip (346317-0)
• 5 Year Warranty if registered within 30 days via MyMakita, 3 Year Warranty on non-registered or post 30 days
SPECIFICATIONS
Voltage: 18V
Capacities: 6.35mm (1/4") Hex
Standard bolt: 5-M16
High tensile bolt: M5-M14
Max fastening torque: 180Nm
Impacts per minute
Max.: 0 - 3,800ipm / Hard: 0 - 3,600ipm / Med: 0
No Load Speed
Max.: 0 - 3,600rpm / Hard: 0 - 3,200rpm / Med: 0
Overall height: 116mm
Net weight: 1.0kg skin
DGA504 18V Brushless 125mm Slide Switch Angle Grinder
FEATURES
• Kickback detection, anti-restart and soft start
• Automatic Torque Drive increases torque to power through any cut
• Extreme performance with 8,500rpm no load speed
• XPT technology that protects against dust & moisture
• Electronic current limiter
• Included accessories: 125mm Grinding Disc, Side Grip (153489-2), Tool-less Guard (123098-1) and Lock Nut Wrench (782407-9)
• 5 Year Warranty if registered within 30 days via MyMakita, 3 Year Warranty on non-registered or post 30 days
SPECIFICATIONS
Voltage: 18V
Maximum capacities
Depressed centre wheel: 125mm
Cut-off disc: 125mm
Sanding disc: 125mm
No load speed: 8,500rpm
Overall length: 362mm
Net weight: 2.5kg
DHS660 18V 165mm Brushless Circular Saw
FEATURES
• 1,000+ Cross Cuts in 4 x2 Pine Timber using 1 x 6.0Ah Battery
• Max cut capacity of 57mm with up to 50° bevel capacity
• Automatic Torque Drive increases torque to power through any cut
• High cutting performance with up to 5,000rpm no load speed
• Electric brake for added safety
• Twin LED job light
• Included accessories: Efficut 165mm 25T Blade (B-62991), Rear Dust Nozzle set for both DHS660 & DHS661 (199230-9)
• 5 Year Warranty if registered within 30 days via MyMakita, 3 Year Warranty on non-registered or post 30 days
SPECIFICATIONS
Voltage: 18V
Blade diameter: 165mm
Max cutting capacities
At 90°: 57mm
At 45°: 41mm
No load speed : 5,000rpm
Overall dimensions: 270mm
Net weight: 2.9-3.2kg
DJR187 18V Brushless Reciprocating Saw
FEATURES
• 32mm stroke with a cutting capacity of 255mm in wood
• Newly designed vertical crank mechanism reduces vibration
• High performance 3,000spm no load speed
• Rafter hanging hook for added convenience
• XPT technology that protects against dust & moisture
• Included accessories: (B-05169) 152mm /6" For Metal 18TPI and (B-05175) 152mm /6" For Wood/Nail Embedded 6 TPI
• 5 Year Warranty if registered within 30 days via MyMakita, 3 Year Warranty on non-registered or post 30 days
SPECIFICATIONS
Voltage: 18V
Capacities
Wood: 255mm
Pipe: 130mm
Length of stroke: 32mm
Strokes per minute: 0-3,000spm
Overall dimensions: 439mm
Net weight: 3.4kg
DML815 18V / 14.4V LXT LED Torch 160 Lumens
FEATURES
• 12 Position pivoting flashlight head swivels from 0º - 170º degrees
• 54hrs of continuous illumination/runtime on a 6.0Ah battery
• 4x 0.5W LEDs provide brightness of 160 lumens
• Compact and ergonomic design at only 272 mm long
• Included accessories: Strap Hook
• 5 Year Warranty if registered within 30 days via MyMakita, 3 Year Warranty on non-registered or post 30 days
SPECIFICATIONS
Voltage: 18V
Illuminance: 1m - 3,000lx
Overall dimensions: 272mm
Net weight:0.3kg
Product Code: DLX6111TX1
This is a great package
Fast transaction and more affordable price
Great kit.