Hyundai Wood Chipper 15HP 308 with Electric Start

Assembling the unit was fairly simple. Just get the stand around the right way so that it folds out of the way when towing. Unit is tippy on undulating ground and could do with a wider spaced wheel axle setup, so you have to take it SLOW when towing behind quad. May get axle modified or new axle. However, the unit chips really well up to decent size branches 80-100mm easy as advertised, can do slightly bigger, just control the feed by holding the branch back. Easy to start. Great on fuel economy. Really fast chipping once underway and lovely chips. Good safety with feed bay protection belts and kill switch. A++ Highly recommend.

If you have a significant sized garden this is the machine for you as long as you have somewhere to store it. It fills in the gap between composting and the chainsaw for all of your woody material - no more trips to the dump or fires. The chippings are really useful too. Previously I had a 7.5 HP machine, this was too slow to be convenient. This machine is heavy but big tyres mean I can move it about without too much trouble

bought for use around school, looks like we might have to extend the axle width just to make it a bit more stable when it is being towed, apart from that perfect for what we want.

This chipper is fantastic. It does everything they said it should do. Very powerful chipper . Highly recommend this item

If you cut down a tree and feed it through fresh it will eat it like a marshmallows if it jams on old thin stuff that has been lying around and has no structure to it open it up and use a peace of 2x4 to turn it and free it up.I brought mine about 4 years ago I have a big backyard and one off the best tools I've brought you do have to tighten things up from time to time but what do expect thay go hard out.

I hate this machine. Bought it 2.5 years ago, it has never been that successful. I use it twice a year for general mulching of branches from ti tree and caprosma and other such natives. It has never chipped very effectively, the chute directional end piece vibrates loose and now doesn’t attach at all any more. The machine frequently jams. I spend more time unjamming the machine than I do mulching. I’m going to scrap it for parts … utterly useless as a chipper.

A good machine - heavily built and well put together, chomps through anything we've thrown at it without blockage. A little top-heavy for towing; need to be very careful.

After having this chipper tip over while towing, before I had even used it, I decided to make a new axle. This setup is considerably wider and very stable. I am lucky enough to have access to a lathe so I made the stub axles myself but it is possible to cut the existing axle out of the bracket and use that but it might void the warranty

This chipper performs well except you can't take it anywhere except over flat even ground, the slightest irregularity and it will tip over, very poorly designed wheel spacing

Works great, easy to start on electric motor, used it heaps. Tow it behind a quad bike, just go slow.