Call us 0800 800 880

Mitre Saw Stand

Pre-order now, new stock arriving 16 May



This sturdy stand is great for mounting almost any mitre saw for easy use. Extending up to 2m long and with a weight capacity of 150kg, it’s perfect for holding large pieces secure while you cut them.

Read more
58 people have this in their cart
Product overview

Product overview

This sturdy stand is great for mounting almost any mitre saw for easy use. Extending up to 2m long and with a weight capacity of 150kg, it’s perfect for holding large pieces secure while you cut them. The height can also be adjusted to offer you a comfortable working position. The mounts have quick-release knobs for easy, efficient use.

The stand folds up easily so you can tuck it away when you’re not using it, or throw it in the car to take to a job site. It’s also easy to assemble, so you can get cracking on your DIY projects in no time.

Note: Not compatible with Flash Slide Compound Mitre Saw 305mm Double Bevel 1800W

• Extendable length from 125cm to 200cm
• Height extendable from 87.5 to 97.5cm
• Two sets of mounts with quick-release knobs
• Two rollers
• 150kg rated load capacity
• Folds easily for storage and portability
• Easy assembly without tools
• 1 Year Trade Tested Warranty

Maximum dimensions: 200 x 62 x 97.5cm
Feet tube: Ø 38x1.0mm
Construction: Steel

Can we help?

Our friendly and knowledgeable gurus are trained to answer all your questions as quickly as possible. So if there’s anything you need to know just give us a call during business hours, or send us an email any time.

0800 800 880
Customer questions

Questions and answers

2 votes
q: Is this compatible with the Bosch DIY Sliding Compound Saw 250mm 1800 Watt? Thanks
a: Yes it is, it also goes great with our Flash 255mm Mitre Saw!
By Trade Tested on August 12, 2019
1 vote
q: To avoid questions on specific model applications. What is the maximum measurement between the slots in the mounting brackets?
a: It's 38 cm total length (of the slot), the maximum distance between the mounts is 82cm, measure to the far edge of each mounting slot.
By Trade Tested on May 25, 2020
0 votes
q: Hello This will actually fit the large saws. I have a DE Walt 305mm saw and I have mounted a piece of 19mm ply to the rails and then fix the saw to that. Works well!
a: Sounds like a great solution!
By Trade Tested on May 25, 2020
0 votes
q: What size saw mounting bolts are required? i.e. what is the width of the slot. Are any bolts aupplied?
a: This comes with 10mm bolts (x4).
By Trade Tested on June 8, 2020
0 votes
q: Hi there, would a Milwaukee MS305DS work with this? Thanks
a: We haven't tested, but most 305mm saws are too big, so we'd assume this was the case here also.
By Trade Tested on May 4, 2020
0 votes
q: Is this compatible with all Flash mitre saws?
a: As per the description it's not compatible with the 305mm model.
By Trade Tested on April 16, 2020
0 votes
q: Hi, Will the stand hold a Ryobi EMS305RG 2200watt mitre saw. Thank you.
a: No, it will be too big.
By Trade Tested on December 22, 2019
0 votes
q: Hi Is it compatible with Makita LS1212 and if so, would it come for Xmas. Want to get my hubby one for Xmas?
a: This will most likely be too big for this stand.
By Trade Tested on December 10, 2019
0 votes
q: Hi, is this compatible with the Hikoki 262mm slide compound mitre saw (C 10FSB)?
a: We haven't tested it, but most likely, this suits most saws of that size.
By Trade Tested on November 12, 2019
0 votes
q: Hi, Is this saw stand compatible with a Black and Decker 254mm slide saw ?
a: Yes it will be.
By Trade Tested on October 29, 2019
0 votes
q: Hi, is this compatible with the Hikoki 262mm slide compound mitre saw?
a: Yes it should be, although we have not specifically tested this.
By Trade Tested on November 15, 2019
0 votes
q: Is this compatible with Ryobi 2000W 254mm Dual Bevel Sliding Mitre Saw?
a: Yes.
By Trade Tested on October 29, 2019
0 votes
q: No weight shown in specifications what is the weight please?
a: It's 18kg.
By Trade Tested on October 22, 2019
0 votes
q: Hi is this compatible with the Black & Decker SMS500 10” Slide Mitre Saw?
a: Most likely yes.
By Trade Tested on November 18, 2019
0 votes
q: Hi there is it compatible with the Makita LS1018L?
a: Yes this will work.
By Trade Tested on September 26, 2019
0 votes
q: Will the AEG DROP SAW FIT?
a: Yes it should do, although we haven't tested this.
By Trade Tested on August 14, 2019
-1 votes
q: Hi there is this stand compatible with the Makita DLS111 260mm?
a: Yes it is.
By Trade Tested on July 18, 2019
0 votes
q: Not compatible with Flash Slide Compound Mitre Saw 305mm Double Bevel 1800W, do you have a saw stand that is compatible?
a: Not at this stage unfortunately.
By Trade Tested on June 18, 2019
0 votes
q: Hi there, Is this compatible with a Dewalt DWS 780?
a: This would be too big for this stand.
By Trade Tested on June 6, 2019
Customer reviews

Customer reviews

Overall rating

4.6 out of 5 stars from 44 reviews
Billbob Masterton


20 days ago


Great product

Cp Auckland

Saw Stand

4 months ago


Initially thought this was a good purchase but the clamps supporting the saw failed and the saw dropped off the stand as I was moving it. Other than this I have found the extension guide rollers very helpful. The clamp holes dont line up with the saw I purchased from Trade Tested so I fixed the saw to a sheet of ply and fixed the ply to the stand. So long as I dont move it around too much its good - just watch the supporting clamps

Chaz Tauranga

I should have purchased one sooner!

4 months ago


This is a great tool for on the job or around the home when doing renovations. So easy to set up and makes the job way easier.

Ross Gray Raumati south paraparaumu

Saw stand

4 months ago


Awesome does what its meant to do.

Snapafun Waikato

Stand 4 Mitre Saw

5 months ago


A well made assembly. Perfect for safe DIY builder plus.

Diyhero Auckland

Superb drop saw stand

6 months ago


Does exactly what it says on the tin. Bolts were a little too long, so needed trimming but otherwise fits my Makita fine. Very robust and solid stand. Certainly no need to buy the manufacturer’s version, when you can treat yourself to this bargain!

JB Bay of Plenty

Easy flat pack and handy to use

6 months ago


I put the Saw Stand together in about 10 minutes. It is extremely flexible and easy to adapt to a number of tools. I have had my Table saw, Mitre Saw and Thicknesser attached and it has worked well

Martin Whakatane

More saw stand

6 months ago


Perfect for the job.

Sampson Auckland

Mitre Saw Stand

6 months ago


Love this product, My 255mm 1800W Compound Mitre Saw mounts perfectly onto the Mitre Saw Stand, and you can slide the Mitre Saw any position on the Stand with ease, and is so easy to pull down and pack away.

Bronek Auckland

Nice little saw stand

6 months ago


Very sturdy, easy to put up and put away, just wish the screws that came with it we better quality and shorter, the stripped as soon as I put them on and are way too long.

Vikash Hamilton

Awersome stand

7 months ago


Great product. Steady and easy to use. Makes the job flow way faster and smoothly.

Anon Nelson

I would recommend

7 months ago


I bought this with the larger 305mm drop saw knowing that it isn't compatible - just used an off cut of boarding and some bolts to make a jig.

IB1LDR Waikato

Happy as larry

9 months ago


Perfect stand for the finishing compound mitre saw and also for light framing timber

Cinna Southland

Great product

9 months ago


I purchased the bench and a flash Mitre saw together, unfortunately the saw is not designed to fit the bench. Problem solved but fixing the saw to wooden planks, then fixing the plank's to the bench. Easy as and as a little older lady who just wants to cut firewood it's perfect!!

Terry Wairarapa

Mitre saw stand - great value

9 months ago


I eventually purchased the stand and wondered how I ever did without it. It came almost fully assembled and folded out easily. Initially through my own fault I mounted my saw on it, back to front, but that was easily sorted. The stand is light, but quite sturdy and had been in constant use for the past month. Highly recommended.

Wallsy Tauranga

Mitre saw Stand plus support stand

10 months ago


Excellent piece of equipment

Paul Hunterville

Very satisfied

about 1 year ago


Very happy with the stand.

Leader Auckland

My saw is HAPPY!

about 1 year ago


all great, easy assembly and can store with legs folded UP on a work bench as well. Wins both ways. Great!!

Ed. Whangarei

Mitre saw stand

about 1 year ago


Good product but I had to adapt mounting bolts to fit my saw.

Rob Waikato

Handy addition to tools

about 1 year ago


Sturdy yet compact when folded down. Quick & easy to assemble. Great height to work at too. Price is good ....even better when bought with a promo discount. I like it !

Stephan Auckland

Myre saw stand

about 1 year ago


Great quality....really great product and price

Mattyj Auckland

Saw bench

about 1 year ago


Great product. Fits the Flash drop Saw perfectly. Only negative is the colour is off. Would be good a neutral colour to match any Saw.

Chris Dunedin, Otago

Mitre Saw

about 1 year ago


This product is made really well. The only thing was, My saw didn't fit. It is too big. I had to make an extension. But still happy with the product.

Shag Foxton


about 1 year ago


This is a must with the saw for a little extra cash. It's the perfect height, stable, has extendable rollers for long timber and the legs fold away for easy transport and storage

Carlos Auckland


about 1 year ago


Good strong stand

SpakeKat75 Rotoru

Excellent value

about 1 year ago


Exactly as advertised, nothing more I can say to that really.. great quality and value for money I would recommend this product.

Ian Auckland

Great product

about 1 year ago


I recently purchased a Mitre Saw Stand & have found it to be a great product, very easy to use & makes the saw so much more useful. Ian. Auckland

Johnnythenat Canterbury

Well built and functional

about 1 year ago


I bought this to hold my Makita sliding compound mitre saw. It is more robustly designed and built than others in the same price range and works beautifully.

Murray Bay of Plenty

mitre stand

about 1 year ago


looks good easy to assemble lite wieght but great for round home

Batman Masterton

Great addition to my tools

over 2 years ago


I bought one of these and gee it makes life easier. I used to balance my old Colt saw, on old saw horses, using knees and sometimes wanting a third hand. Not any more. I bought the roller stand as well, then thought i should also get a mitre compound saw. Which i did. All are great.....

NZRanger Dunedin


over 2 years ago


I got this with the Flash Slide Compound saw, So glad I did!!!.. It's very sturdy and quite frankly makes cutting so much easier!. If you're looking for a saw/stand combo get this with the Flash Mitre Saw, you won't regret it!

Stu Wellington

Love it

over 2 years ago


Great quality for the price. Easy to move around with the saw on, foods away nicely too. Has had heaps of use so far and no sign of wearing out.

Dan Northland

mitre stand

over 2 years ago


One issue I had with the stand is the bolts that attached to saw and the stand, bolts are too long so had to replace for shorter ones,and easy to screw in top and bottom, especially when you don't have the right tools to start with other then that very well built saw stand,easy to put together straight out of the box recommended all.

Chas Hawkes Bay

Great buy

over 2 years ago


I bought this for my son as he had just purchased a mitre saw. He is very happy with it as it is portable and very versatile.

Ron Canterbury


over 2 years ago


Great product works well with the mitre saw

Rick Wellington

A good deal

over 2 years ago


Does the job

Marcus Feilding

Very useful

over 2 years ago


This saw stand was very useful when I built my deck.

David Auckland

Robust stand

over 3 years ago


Stand is robust and is a good adjunct to the mitre saw.

GPS West Coast

Mitre Saw Stand

over 3 years ago


Excellent price with excellent adjustments. Some flex and reasonable stability without being of industrial quality. Bolt fixings between saw and bench would benefit with quick clasp system to assist portability.

Ted Waikato

good quality

over 3 years ago


a must have if you have a mitre saw. very sturdy. easy to stow when not in use. very happy with purchase

Edmeisteru Wellington

Fantastic value for money

over 3 years ago


Great product - better than I thought it would be. Works perfectly with my mitre saw. Great price and prompt delivery. Excellent!

Olly Whangarei

Saw stand

over 3 years ago


Took a little to put saw and stand together, but works great.nice and light and easy to store

Bruce Hawkes Bay

Mitre Saw Stand

over 3 years ago


Strong and firm. Good vbalue for money, recommended.

Greenglass Auckland


over 3 years ago


Stand works fine. Had to make some modifications to fit my BLack & Decker mitre saw.

Related categories