Whether you’re painting, cleaning, building or tackling any other serious job at height, a quality scaffolding tower is essential for the enthusiastic home handyman.
Whether you’re painting, cleaning, building or tackling any other serious job at height, a quality scaffolding tower is essential for the enthusiastic home handyman.
With a wide non-slip platform you’ll have plenty of room to move around safely. The tower is sturdy with tough cross braces for exceptional stability - exactly what you want when you’re high up off the ground! The lockable rubber castor wheels make it easy to roll it to your next spot. You can even work on uneven surfaces simply by adjusting the height of one side of the platform.
This scaffolding tower has been robotic welded then fully hot dip galvanised. This means the joints aren’t going to rust or become weak, even if you leave it out in the rain. The rivetless, weldless joints in the platform also give it extra strength, so not only is it super reliable, this scaffolding will make sure you get the job done safely as well.
A solid scaffolding tower is a great investment that will last for years - saving you the cost and trouble of hiring one again and again. Order yours today. You’ll wonder how you ever did without it.
Comes with a 2 Year Trade Tested warranty.
Important Safety Requirements
- For DIY/domestic use only. This tower configuration must not be used on a worksite. See Worksafe for more information.
- We recommend securing the tower to a building, or using outriggers to ensure stability.
- Refer to our Scaffolding Tower Safety Guide. Read fully before using this scaffolding.
FEATURES
• Full galvanised steel construction
• Hot-dip galvanised finish
• Robotic welded
• Fully corrosion-resistant
• Non-slip tread on planks
• Ladders provide access from both sides
• Height adjustable for use on uneven surfaces (up to 250mm)
• Lockable, anti-wear non-slip rubber castors
• Load tested to AS/NZS 1576.3:1995
• 2 Year warranty
PARTS
- Ladder frame x 6
- Platform planks (1905mm x 240mm) x 6
- Adjustable base plate (up to 250mm) and lockable castor wheel x 4
- Diagonal brace bars x 6 sets
- All nuts, bolts and pins
SPECIFICATIONS
Assembled dimensions: 5.25m (H) x 1.9m (W) x 0.95m (D)
Maximum recommended working height: 4.25m
Material: Fully hot dipped galvanised steel
Frame diameter: 42.7mm
Frame steel thickness: 2.0mm
Castor diameter: 150mm
Total load rating: 350kg
Assembled weight: 180kg
Our friendly and knowledgeable gurus are trained to answer all your questions as quickly as possible. So if there’s anything you need to know just give us a call during business hours, or send us an email any time.
We are very pleased with this product. It exceeded our expectations. Easy to assemble, safe and sturdy. Very good firm to deal with.
A worthwhile investment for use where there is a suitable area for erecting the scaffold Easy for me to assemble or dismantle. If the top level is used a form of barrier is needed or worker protection Stable when used with the outriggers. Level adjusters easy to use in conjunction with a level.
Easy enough to assemble by myself. Great as I can reach the high point on a 2 storey house with room to spare. Reasonable stable with outriggers
All parts present.
For a domestic scaffold tower I have been really impressed with it (particularly for what it cost). Although I'd have preferred somewhere proper to clip onto when using a harness and fall-arrest system. The only criticism that I have is that it arrived without any instructions - although it was quite simple to erect. It is able to be erected by a single person although it is much easier with two. I purchased the outrigger kit at the same time which improved the tower further (when working upon it at the maximum height) and recommend this also.
Need 2 men to put together. We are in our middle 60s. My husband did the lifting of the sides and I just held them while he fastened them into place. We felt safe climbing up and descending. Would not hesitate to recommend this scaffolding to anyone needing one.
It’s a good product, for the price, and comparing it against what other competitors offer. Some of the finishing on the aluminum is a bit rough, eg the crossbars may need a hammer to put into the pegs to attach them to the scaffold. At least one of the catches on the platform was upside down. As stated on the instructions the scaffold is not meant to be left out in the rain, but who is going to dismantle a 5m scaffold every time it rains or have a garage 2 stories high to wheel it under? The instructions are not good, they are not complete enough and could do with an example of how to erect it. If just 1 person erecting it start with one end against something and then attach the crossbar, then the other end and build up from there. An option to upgrade to non-rusting parts would be good. Fixing the wheels underneath is difficult with just 1 person. Similarly for moving the platform when stabilizers are present. Can feel a bit rickety. Perhaps offer extras such as clips to hang things off. And Safety harness. Mostly, I am happy with it and it has allowed me to paint my 2 storey house.
A good quality, easily erected and adaptable tower.
Good for job needs- some planks don’t fit as well as others- but over all value for money.
Scaffold tower has been a success. Once tethered to the build this scaffold is safe and totally accessible. Great for use internally with its industrial wheels. Very pleased with our purchase..