Oak Wine Barrel Water Butt

Start collecting rain water and reap the benefits with this full size Oak Wine Barrel Water Butt kit that has everything you need to get started!

Set up one of these Oak Wine Barrel Water Butts and you'll quickly discover the multitude of advantages these water-saving contraptions boast.

With a diverter kit, a hole saw and all fittings included, this system is straight forward to set up and only requires a drill to add the final screws.

The rustic charm of this real ex-wine barrel - all the way from France, ooh lah lah - makes this water butt less of an eyesore in your backyard than an ugly plastic drum.

Water butts are suitable for nearly all backyards, all you need is a level ground surface and a downpipe from your roof. Attach the supplied downpipe diverter and run it to the butt, then you're good to go.

Have a ready supply of water for all your gardening needs - even during a hose ban! Even better, save on your water bills by collecting rainfall. Harvested rainwater is great for plants, lawns, flowers, fruit and vegetables as it's still packed with wholesome nutrients, unlike tap water which has often been treated.

If you don't have an outside tap in your garden, then installing one of these beauties makes a lot of sense to get rid of the hassle of going into your kitchen or bathroom to fill a watering can every time your plants needs a sprinkle of H20.

The list of benefits is endless, there's no butts about it...

FEATURES
• Oak Wine Barrel Water Butt
• Full size barrel for collecting rainwater that's diverted from downpipe using diverter kit provided
• Collect rainwater that's diverted from downpipe
• Save money on water bills and have backup during hose bans
• Nurture your garden with untreated, chemical free water that still contains all its nutrients
• Handy tap at base of barrel and pre-existing inlet valve in top of barrel
• Round downpipe diverter kit
• 1.5m long hose with 12mm push on fittings to connect barrel to downpipe diverter
• Installation instructions and hole saw for downpipe
• Brass tap, inlet and breather fittings
• Real ex-wine barrel from France

SPECIFICATIONS
Includes: Full size barrel with tap at base, inlet valve in top of barrel, hose with push on fittings to connect barrel to downpipe diverter (for round downpipe), downpipe diverter kit with installation instructions and hole saw for downpipe.
Size: Dia. 74cm (widest point), H 89cm
Volume: Approx. 225L.
Materials: Brass tap, inlet and breather fittings
Hose length: 1.5m long
Hose fittings: Standard 12mm click on hose fittings on each end (connects from downpipe valve to barrel)

Note: No two wine barrels are the same. There may be variance in the character of each individual wine barrel, i.e stain colour or grain. Position & number of hoops may also vary.