Replace the panels of your Evergreen Greenhouse over the years with this 1430x700x6mm Twinwall Polycarbonate Panel.
Replace the panels of your Evergreen Greenhouse over the years with this 1430x700x6mm Twinwall Polycarbonate Panel.
These panels are twinwall 100% virgin 6mm polycarbonate with UV coating & protection film, ultraviolet radiation proof.
SPECIFICATIONS:
1 x panel
Size: 1430x700x6mm
Thank you for changing the 6 mm panels to the 3mm panels, but what I had not realised is that, when ordering replacement parts, they do not come in the correct size panels. You need to cut them to size and then try to fit them. Sliding the new panels into place on the roof, has proved to be impossible. I'm obviously not a very capable handy man. What a waste of money buying the panels as far as I'm concerned.
Seems our greenhouse (quite old) that used this product used 5mm, not 6mm so a bit of crimping on the sides was required to install the new panel, but once in, it was fit for purpose, works, and looks fine. Bit of a wrestle but we got there in the end. Super fast delivery and great product.
Nine years ago I bought an Evergreen polycarbonate greenhouse. After that length of time, some panels need replacing. I started with one panel. Other retailers, over $75, standard sheet, not cut to size. Ever cut this stuff? Believe me, cut to size is of great benefit! Then we had the first of a series of gales. I lost four panels from the roof. I bought four panels. The descriptions were very clear, allowing me to choose the best deal for me. The panels were very well packed. The four panels have been replaced but the latest gales, with record windspeeds, have taken out four more panels plus a side panel. With no hesitation, I got hold of TT. They are Great Traders.
I ordered these panels to replace older, hail damaged ones on the roof of my greenhouse. They arrived promptly and will be installed in the near future. After much research Trade Tested had the correct size for the most reasonable price. Thank you.
perfect fit and easy to install just slid right in for the smaller panels you can just cut to size with a utility knife.
Just what I needed for extra insulation on my walkin plastic greenhouse. Can hardly wait for some warmer weather to get my tomatoes planted.
But, difficult to get in when greenhouse is already erected. You need to cut the width down a few mm. Otherwise all good. Thank goodness you can get replacement panels through trade tested.
I was delighted when I found that you stocked these sheets at the exact size I needed. The original greenhouse supplier didn't have them. They arrive in good condition and I was able to replace the original damaged panels. Verry happy.