There is plenty of room to spread out in this fantastic 11.1m² Nordic-style apex roof log cabin. Whether you want to run your business from here, create a cosy garden hideaway or the perfect space for entertaining, this cabin will do it all while being a great looking addition to your garden.
The front facing windows are double-glazed and let in plenty of light, making it the ideal spot to work, create or just relax. The double doors give easy access and mean you can open the space right up when the sun is shining.
Crafted from kiln dried Nordic spruce, the chalet cut 44mm thick logs offer increased protection against the elements, while the tongue and groove floor and roof construction makes for a precise, quality finish.
With comprehensive instructions, assembly is easier than you might expect, while the house is delivered untreated and unfinished, so you can choose the stain or colour that fits best with your location.
The 5 Year Manufacturer Warranty means you know it’s going to be a standout feature or your garden for many years to come.
Whether you need a quiet space to work, or somewhere to banish noisy teenagers, this log cabin is a stylish, practical addition to any backyard.
Order yours today.
• Traditional Nordic apex roof garden house with double doors
• 11.1m² of floor space
• Renewable kiln-dried Nordic Spruce
• Delivered unfinished – choose your own colour or finish
• Double-glazed door and side windows
• Reversible construction
• Storm bracing
• Low door sill with stainless steel covers
• Tongue and groove flooring and roof for a quality finish
• Roofing felt included
• Chalet cut wall logs
• Foundation joists included
• 5 Year Manufacturer Warranty
Dimensions: W 3.9m x D 3.0m x H 2.49m
Floor area: 11.1m²
Ridge height: 2.45m
Eaves height: 2.11m
Wall thickness: 44mm
Roof panel thickness: 16mm
Floor board thickness: 19mm
Door opening size: W 151cm x H 175cm
Window size: W 60cm x H 111cm
Glass: 15mm double glazed (3mm glass - 9mm gap - 3mm glass)
Snow load rating: 90 kg/m²
Packaged size: L 540cm x W 120cm x H 80cm
As this cabin is over 10m², consent is most likely required by your local council. Specifications and diagrams are included with this cabin, however PS1 documentation is not available. Make sure you check requirements with your local council before purchasing.
A good foundation is the key to guaranteeing the longevity and quality of your cabin. Only a completely level, rectangular foundation and bearers will ensure problem-free installation of the cabin.
The floor must be a minimum of 50mm off the ground, preferably more. The underside of the floorboards and the joists should be painted thoroughly and care taken to ensure enough airflow under the house. We recommend using Malthoid DPC between joists and the ground.
Your chosen site must be levelled and compacted to minimise ‘settling’. We recommend using strip or spot foundations, concrete foundations or pavers or a cast concrete bed.
If unsure consult with, or have the foundation prepared by a specialist.
Note: This video shows the construction of a similar log cabin from Palmako, however it does not represent this exact product.
Very nice and good quality product
about 1 year ago2019-02-23T16:21:06+00:00
I am so happy with this garden house and also with the company. I can highly recommend both.
Could do better
about 1 year ago2019-01-03T11:53:13+00:00
Overall, reasonably satisfied with the product although there were several problems some of which relate to freight and delivery. 1.Some crush damage to window top lip from strapping. 2. Delivery was not door to door despite incremental cost of delivery from Christchurch to Hanmer Springs of around $300. Packages were offloaded by forklift at local hardware store and packages had to be broken down to be transported to site. Consequently, any restraining of timbers as they dried (were they too wet?) was lost. They were stored under cover (garage before assembly, but some logs and beams were significantly twisted by this time making assembly difficult. The net result is a lozenging of the front wall which has virtually no shear bracing. 3. One "extra" long log was both distorted and damaged on the tongues to be unusable. 4. There was one end wall log short, fortunately made up for by having an additional "extra" long log from which the missing long log could be made. 5. The thickness of the floor boards was not consistent.
Iris log cabin
about 1 year ago2018-09-20T09:49:52+00:00
Great product, looks awesome finished