Get this great custom made wooden floor kit, guaranteed to fit perfectly in your new Trade Tested shed. Manufactured locally and made from FSC Certified New Zealand Pine, this great kit comes with everything you’ll need to create the perfect foundation and floor for your awesome new shed.
The floor is rebated to prevent any moisture damage and all the timber has been treated - rough-sawn H4 bearers and rough-sawn H3.2 floorboards. The kit also contains galvanised nails.
All timber is cut to size and takes very little time to build.
• H4 Bearers (rough-sawn)
• H3.2 Floorboards (rough-sawn)
• Galvanised nails
Bearers: 1550mm x 75mm x 50mm (7)
Floorboards: 1508mm x 150mm x 19mm (20)
Nails: 60mm x 2.8mm (170)
Our friendly and knowledgeable gurus are trained to answer all your questions as quickly as possible. So if there’s anything you need to know just give us a call during business hours, or send us an email any time.
9 days ago2021-01-12T18:53:55+00:00
Bought the floor for the shed size purchased, recommend as not cutting or messaging to make, follow instructions and very easy. Good value for money.
2 months ago2020-11-09T21:42:30+00:00
The cuts along the slats of wood we received were inconsistent - we measured along the length of the slats, some were 140mm on one end and 150mm on the other. We had to basically move our pieces around (and may have had to trim some) - we managed to jigsaw puzzle fit the floor together. Uneccessarily frustrating and time consuming as a result.
Not correct size
5 months ago2020-08-28T00:05:58+00:00
Unfortunately the base was too small for the shed even though they were purchased together.
8 months ago2020-05-14T21:27:48+00:00
"Custom made wooden floor kit, guaranteed to fit perfectly in your new Trade Tested" "All timber is cut to size and takes very little time to build" Shed base was too small, we had to add 100mm floor boards to the width and length to accommodate the shed. Floors boards not square which complicated construction. Easy enough to build though
about 1 year ago2019-12-22T22:14:28+00:00
Easy to construct, instructions are simple and clear. Note, you will have to allow for the angled corner brackets of the walls.
over 2 years ago2018-05-23T17:03:16+00:00
A little information included in the floor's relationship to the shed could have helped.
Good but wrong width
over 3 years ago2017-03-14T12:11:01+00:00
I purchased this to go with my 1.55 x 3.07 shed that I purchased at the same time. The floor is quite good but after putting the shed and floor together found that the floor is not actually the right width for the shed...not sure of the value of getting a custom sized floor if it is not actually the right size...