Osmo PolyX-Oil Interior Tint 2.5L - Light Grey

Polyx®-Oil Tints are just like normal Polyx®-Oil in satin, but contain a small amount of coloured tint, suitable for use on timber floors and furniture and general interior timbers such as sarking, doors and panelling.

This oil should not be considered as a product for staining timber, but as a finish which will create an even tone to a timber's grain. For example, the Polyx®-Oil white tint, will reduce the yellowness of a timber such as macrocarpa, as well as reducing variations in grain colour to provide a more harmonious finish.

For interior use only. Polyx®-Oil Tints is suitable for use on timbers to which normal Oil can be applied. It is not recommended for use on timbers with high oil and resin content such as Matai, Totara, Kwila or Spotted Gum - please see oily woods guide below.

Normally, one coat of Polyx®-Oil Tints is applied, followed by one coat of normal Polyx®-Oil (Satin, Semi Matt or Matt). 2 coats of Polyx®-Oil Tints can be applied as a stand alone finish without the need for a clear top coat.

FEATURES:
• Light Grey Tint
• Food safe when cured
• Provides a light washed effect to even out the colour of the timbers grain
• Resistant to common liquid spills such as water, juice, cola, coffee, tea and wine.
• Suitable for use on children's toys, cots and bassisnets
• Micropourous breathable finish which does not crack, peel or flake
• Easy to spot repair

SPECIFICATIONS:
Colour: Light Grey Tint
Coverage: Approximately 24 square metres per litre with one coat
Recommended number of coats to apply: 2 coats OR 1 coat plus a top coat of clear Polyx Oil
Drying time: 24 hours
Volume: 2.5L
Carton size: W16cm x D16cm x H16cm

Product code: 3067

View Product Info Sheet

View Osmo Tints Safety Sheet

View Handy Tips Sheet

View Oily/Resinous Woods Guide