Osmo Natural Oil Woodstain 2.5L - Red Cedar

Osmo Natural Oil Woodstain in Red Cedar is a transparent wood stain for vertical exterior timbers, such as timber cladding, garage doors, pergolas and other exterior trim.

Extremely weather and UV resistant, with a satin finish, woodstain is a 2 coat system.

Natural Oil Woodstain is not recommended for areas where food may be present such as timber patio furniture, as the product contains biocides.

Coverage is approximately 26 square metres per litre on dressed timbers, and 12 square metres per litre for rough sawn or band sawn timbers. The coverage rates also depend on whether the timber is a hardwood or softwood.

Renovation is easy, with a 1 coat application to the cleaned, dry and intact surface after approximately 24 months depending on the timber's exposure. Where the timber is fully protected from the sun and weather, the time between re-coats will be longer.

FEATURES:
• Base and top coat in one finish
• Fast drying
• Transparent finish means wood grain remains visible
• Extremely weather and UV resistant
• Highly water and dirt resistant
• Reduces wood swelling and shrinkage
• Microporous breathable finish which does not crack, peel or flake
• No sanding necessary before future re-coating

SPECIFICATIONS:
Colour: Red Cedar Stain
Volume: 2.5L
Coverage: Up to 26 square metres per litre with one coat. On softwoods such as cedar and pine, coverage will be less.
Number of coats recommended to apply: 2
Drying time: 4 - 6 hours
Carton size: W16cm x D16cm x H16cm

Product code: 728.2.5

View Product Info Sheet

View Osmo Stain Safety Sheet

View Handy Tips Sheet

View Oily/Resinous Woods Guide