Designed for optimum control of pumps used in plumbing systems, this intelligent design maintains both pressure and flow and controls the operation of the pump automatically.
It needs no pressure tank as in the traditional systems. There are no plenum chambers to recharge and no irritating variation in pressure and in flow at the point of use. No adjustment or maintenance is required. It’s dependable, durable and simple to install.
Functioning: The unit is programmed to perform all the pump control operations automatically. When particular operational breakdowns occur, such as water failure, obstruction of the suction pipe, etc, the unit recognises the breakdown and a red LED Failure lights up. At the same time a stop signal is sent to the pump to prevent damage caused by it working in the absence of water. After rectifying the cause of the failure, the system can be restarted by pressing the Reset button.
Application: Self-Priming Pump/Jet Pump/Garden Pump/Clarified water pump
• Auto starts when the tap is turned on / pressure below 1.3bar
• Provides constant pressure at constant flow
• Constant operation at all flow levels
• Automatic pressure control
• R1” connector
• IP65 weather protection
• 2 power cables – 0.5m, 1.5m
• Dry run protection protects the pump from damage
• Eliminates water hammer
• Protects plumbing
• Compact and easy to install
• Provides constant pressure
• 1 Year Hyundai Warranty
Rated voltage: 230V
Max. current: 10A
Max. power: 1.1KW
Starting pressure setting: 1.3bar
Max. working pressure: 10bar
Connection thread: R1"
Protection rating: IP65
Max.working temperature: 55℃
Wiring requirement: 7.5-9mm
Package size: 26cm x 26cm x 26cm
Awesome customer service, controller is working
Only downside is it comes with 1 plug, but the motor side needs wired in. My pump already had a plug on it, so I wired a plug on the controller. Adds a degree of difficulty so definitely not plug and play
Good quality pressure controller
Good product fit for the job
Easy to install and works great.
Controler does as its supposed to a sparky will be required to wire up to pump
This works perfect with the jet pump.
Excellent controller, easy to fit,good price.
HIGHLY RECOMMEND WORKS GREAT
easy to install with no need to setup