Make light work of hard concrete, steel, masonry, wood and brickwork with this powerful SDS+ rotary hammer drill from Flash.
Make light work of hard concrete, steel, masonry, wood and brickwork with this powerful SDS+ rotary hammer drill from Flash.
Chip, chisel or drill quickly and easily, with variable drill and hammer rates and three separate operating modes – hammer drill, hammer and drilling.
The powerful 1500W motor has enough grunt to take on reinforced or old concrete, while the ergonomic rear handle features an anti-vibration design and comfy rubber grip to minimise fatigue during extended use.
Large, sturdy switches make operation easy while wearing gloves, and with a maximum impact power of 5 Joules, you’ll need to hold on tight.
Adjustable drilling and impact speeds allow you to set your tool up for the task at hand, while the front handle is adjustable through 360° so you’ll always be in control.
Three SDS+ bits are included, as well as pointed and flat chisel bits in case you need to do some breaking or groove out a channel. The SDS+ chuck provides excellent bit retention and allows for quick tool changes while accepting a huge range of accessories.
It comes in a sturdy carry case and includes a handy maintenance kit, so you’ve got everything you need to get cracking on the tough jobs.
Add some great value grunt to your power tool collection and order yours today.
About Flash Exclusive to Trade Tested, the Flash range of power tools have been developed to excel at the jobs Kiwis need to do.
Premium parts and materials mean they will be working hard and looking good for years to come, while clever design touches and a wide range of accessories mean you’ll always have the right tool for the job.
FEATURES
• SDS+ drill bits x 3 (Ø8mm, Ø10mm, Ø12mm)
• 3 operating modes – Hammer drill, hammer, drill
• Tough cast alloy and ABS plastic housing
• Steel, SDS+ chuck
• Powerful 1500W motor
• Adjustable speed and impact rate
• 1 Year Flash Warranty
SPECIFICATIONS
Rated power input: 1500W
No-load speed: 0-950 r/min
Impact rate: 0-4200 BPM
Impact energy: 5J
Maximum drill capacity Ø: Steel 13mm, Wood 40mm, Concrete 32mm
Cord length: 2m
Weight: 7.5kg
Had two 6m x 3m louvered pergolas to secure to concrete; that’s 48 holes and this rotary drill just breezed through it.
Good buy at a fair price did the job with ease dismantled concrete water tank
Did the job no problem's
I needed a sds hammer drill that was affordable and just used a couple of times a year. From the major brands it was really difficult to find one in my price range and that was not battery driven. This one did the job perfectly. It feels well-made. It drilled smoothly through concrete.
1st time user, practiced on some broken concrete 1st then cut loose by easily chipping concrete off piles to give straight edge before quickly & easily drilling into piles. next project lol.
Did exactly what I wanted it for, to drill a couple of hundred holes in a concrete slab- and still like me
i used the drill in hammer mode to remove bricks from a wall on the side of our house, about 2000 huntly bricks. its heavy but coped well and did the job required. i greased the tool bits before use and they came out easily after use. I would recommend this tool.
Not a bad piece of kit fit have the handle piece fall off but not a problem really couple of the front bolts came loose but after they were tightened never happened again have done loads of different jobs with it and has been put through hell and still going strong.
Working well exactly what I needed
Had one of these drills for some time now, OK on drilling but using as a breaker on mp25 concrete was too much for the bits and the chuck, snapped the chisel bit off in the chuck then when using the pointed bit the chuck fell apart. Plastic can't handle the impact.