Call Us 0800 800 880

HPM RCD Protection Lead Yellow 3 Core 1.5mm² 2m

In Stock
be quick! Only 4 left
or 4 payments of $34.75 on
Price GuaranteeSeen a lower price?Ask us to beat it

Get the job done safely with a heavy duty safety switch protection lead by HPM.

Read more
Shipping options to
Please select one
Quantity: 1
Add to Wishlist

Product overview

Get the job done safely with a heavy duty safety switch protection lead by HPM.

This lead will constantly monitor the balance of the current flow in both the active and neutral wires of your tool in use and the lead on the line side of the safety switch.

If an imbalance occurs, as it would if your tool became faulty and current leaked to earth the portable safety switch would detect this imbalance and immediately cut off the power before a fatal amount could pass.

The loss of current of earth needs only to be 30 milliamps (thirty thousandths of an amp) for the portable safety switch to respond but immediately shutting off the power. The time that a person is exposed to an electric shock is a crucial factor in determining the severity of the accident. That's where the HPM portable safety switch is a life saver!

Ideal for indoor & outdoor use with caution. The heavy duty construction of this product makes it ideal for building sites or around the house, patio area, workshop, garage, garden or any place where electrical tools or extension cords would normally be used.

Complies with Workcover, OH&S, Electrical safety requirements and AS/NZS standards for construction and demolition sites. Fully molded and clear plug and socket ends for easy safety inspection.

An icon of the New Zealand electrical industry, HPM are committed to bringing you the best in everyday, affordable electrical. Trusted by electricians, the HPM brand denotes quality, safety and reliability.

• Heavy duty safety switch protection lead
• Constant monitoring of current flow
• Immediately cuts off power when imbalance is detected
• A literal life saver!
• Ideal for workshop, factory & garage use
• Clear plug ends for easy inspection of wires
• Bright yellow for great visibility / less trip hazard
• Complies with Workcover, OH&S, Electrical safety requirements & AS/NZS standards
• 5 Year Warranty

Voltage requirement: 230-240V ac.
Load: 10A, 2400W max
Tripping sensitivity: 30mA
Tripping time: 30mS @ RTC.
Lead length: 2m
Lead gauge: Heavy duty
Plug & socket type: Molded, see through
Product code: R5102/1


Can we help?

Our friendly and knowledgeable gurus are trained to answer all your questions as quickly as possible. So if there’s anything you need to know just give us a call during business hours, or send us an email any time.

0800 800 880

Questions and answers

There are no questions and answers.