Log Cabin Garden House Anna 7.7m x 4.0m

The Palmako Anna 26.8m² + 1.9m² Log Cabin is a modern styled building with a double door in the centre which is set back providing a small terrace area to park up a chair and relax in the sun.

Crafted from kiln dried Nordic spruce, the chalet cut 70mm thick logs offer increased protection against the elements, while the tongue and groove floor and roof construction makes for a precise, quality finish. Featuring two large spaces with ample room in each, this cabin is suitable for a variety of different uses.

The Anna is complete with two front facing double windows, a glass panel on each of the double front doors, and a third set of double windows on the side of the building. This generous design makes the Anna cabin bright and airy inside whilst also providing lots of heat retention with the generous 70mm wall logs and double glazing throughout.

With comprehensive instructions, assembly is easier than you might expect. Joists & terrace boards are treated, while the remainder of the house is delivered untreated and unfinished, you can choose the stain or colour that fits best with your location.

The 5 Year Manufacturer Warranty means you know it’s going to be a standout feature for your garden for many years to come.

Whether you need a quiet space to work, or somewhere to banish noisy teenagers, this log cabin is a stylish, practical addition to any backyard.

FEATURES
• Traditional Nordic apex roof garden house with terrace
• 26.8m² + 1.9m² of floor space
• Renewable kiln-dried Nordic Spruce
• Delivered unfinished (joists & terrace boards are treated) – choose your own colour or finish here • Low door sill with stainless steel cover
• Storm bracing
• Double glazed windows with tilt & turn latch to open
• Tongue and groove flooring and roof for a quality finish
• Roofing felt included (Shingles an optional extra - 16 packs required)
• Chalet cut wall logs
• Foundation joists included
• 5 Year Manufacturer Warranty

SPECIFICATIONS
Optional roof shingle packs required: 16
Dimensions (footprint): 7.9m x 4.2m x 2.97m
Dimensions (incl. overhang): 8.3m x 4.8 x 2.97m
Floor area: 26.8 + 1.9m²
Ridge height: 2.97m
Eaves height: 2.29m
Wall thickness: 70mm
Roof panel thickness: 19mm
Floor board thickness: 28mm
Window size: W 117cm x H 145 cm
Door size: W 74cm x H 189cm, W 148cm x H 189cm
Glass thickness: 17mm double glazed (4mm glass - 9mm gap - 4mm glass)
Roof gradient: 17.5°
Packaged size: Carton 1 - 170cm x 100cm x 210cm, 450kg. Carton 2 - 830cm x 120cm x 50cm, 1500kg. Carton 3 - 600cm x 120cm x 90cm, 1550kg.
Packaged weight: 3640kg

This cabin has a floor area under 30m², this means it is exempt from the consent process when added to your property as a structure for ancillary use. Please see our 'consent information' button below for more information.

Specifications and diagrams are included with this cabin, however PS1 documentation is not available. Make sure you check requirements with your local council before purchasing.

Construction Points:

A good foundation is the key to guaranteeing the longevity and quality of your cabin. Only a completely level, rectangular foundation and bearers will ensure problem-free installation of the cabin.

The floor must be a minimum of 50mm off the ground, preferably more. The underside of the floorboards and the joists should be painted thoroughly and care taken to ensure enough airflow under the house. We recommend using Malthoid DPC between joists and the ground.

If unsure consult with, or have the foundation prepared by a specialist.

Consent information

View assembly manual

View design statement

View product video

Note: This video shows a similar log cabin from Palmako, however it does not represent this exact product.