Get this great custom made wooden floor kit, guaranteed to fit perfectly in your new Trade Tested shed. Manufactured locally and made from FSC Certified New Zealand Pine, this great kit comes with everything you’ll need to create the perfect foundation and floor for your awesome new shed.
Get this great custom made wooden floor kit, guaranteed to fit perfectly in your new Trade Tested shed. Manufactured locally and made from FSC Certified New Zealand Pine, this great kit comes with everything you’ll need to create the perfect foundation and floor for your awesome new shed.
The floor is rebated to prevent any moisture damage and all the timber has been treated - rough-sawn H4 bearers and rough-sawn H3.2 floorboards. The kit also contains galvanised nails.
All timber is cut to size and takes very little time to build.
FEATURES
• H4 Bearers (rough-sawn)
• H3.2 Floorboards (rough-sawn)
• Galvanised nails/nail plates
SPECIFICATIONS:
Bearers: 1535mm x 75mm x 50mm (20)
Floorboards: 2268mm x 150mm x 19mm (40)
Nails: 60mm x 2.8mm (420)
Nail plates: 6T5 180mm x 34mm (20), 6T10 180mm x 68mm (10)
Our friendly and knowledgeable gurus are trained to answer all your questions as quickly as possible. So if there’s anything you need to know just give us a call during business hours, or send us an email any time.
Very good quality
Hard to get floor square with what was supplied
All wood was cut to correct size, correct amount of nails supplied for the way i built it (see later comments) all gang nails needed were supplied. Please use generic instructions along with the instructions for the size floor you are using other wise you may be doing some head scratching. On laying the floor out according to the illustration I realized that the join in the floor boards would have no support if the bearers were spaced at equal intervals, so placed a bearer half way along to line up with the join then spaced the bearers on the side that would take the most weight and one less bearer on the lighter load end of the floor. It would be good if the floor illustration was changed ,and one less or one more bearer supplied so equal distance spacing can be maintained.