Bamboo Privacy Screen Fencing 2.4m x 1.8m Natural

A:

It varies as the bamboo is a natural product. Roughly it would be 0-4mm

A:

Yes it can be shaped.

A:

It's recommended to install your fencing against a fence or between wood posts and to use zip ties to secure.

A:

There is no set method, it depends on where it is going. You could keep it simple drill and screw it to the fence using galvanised or stainless steel screws. It is pretty light, so you shouldn't need too many fasteners, just enough to hold it securely in a breeze or if a cat jumps on it etc. The screws should be approx 3mm in diameter and about 30 - 40 mm long, the idea being that you pre-drill the holes in the bamboo, to avoid any splitting that could occur if you just tried to punch the screws through. Figure out the diameter of the thicker pieces of bamboo and this will give you an idea of the length of screw you need. Other options include the wire and screw eye method which can be quite fiddly - there are guides online for this if you google. Whatever you go for, as your fence is not completely linear, you may want to think about using spacer batons or similar to make it all line up and help with moisture dispersal. Yes you can trim it to fit.

A:

Yes it can be shaped.

A:

Handsaw, or circular saw - nothing special!

A:

The packaged roll is 180cm (l) x 30cm (w).

A:

No it's not designed for this.

A:

Yes you can.

A:

It should be fine as long as it's fixed properly - it's not designed to be free standing.