Interlocking Garage Floor Tile System - 30 Pack Tiles Grey

Level up your garage or workspace with this hard wearing Interlocking Garage Floor Tile System. Built to last & designed for straight forward DIY install, this kit allows you to protect, customise, safety proof or raise your flooring without needing to hire a professional!

This 30 pack of tiles covers 4.8 square metres, with each tile measuring 40x40cm. Designed with a hardwearing structure, this system is manufactured to withstand oils, petrol, automotive fluids, alkalis, acids and solvents. What's more, this system boasts a load rating of up to 3000kg dispersed weight per set, making it very suitable to drive on and park on.

Quick and easy to install, these DIY tiles can simply be laid out in position over any hard, flat surface and tapped together gently with a rubber mallet. If you wish to finish the edges of your install, you can trim the outer edge of these tiles to suit your space, or add a pack of Ramps & Corners to finish (not included). They can be vacuumed, mopped or hosed down to keep them clean.

The sleek grey colourway will blend seamlessly into your existing decor or aesthetics of your space, offering a practical, non-offensive option for many different applications.

Whether you're installing in a garage, workshop, patio, rumpus room or outdoor bathroom, these tiles provide excellent floor protection and anti-slip safety in a wide range of environments.

FEATURES:
• Straight forward DIY interlocking system
• Hardwearing & resistant to oils, petrol, automotive fluids, alkalis, acids and solvents
• Suitable for driving cars on with a dispersed load rating of 3000kg on a 4.8 square metre install
• Easy to clean and maintain with a vacuum, mop or hose
• Self-draining design prevents water accumulation
• Open weave anti-slip design for traction of both feet & vehicles
• Sleek grey colourway is visually appealing
• Suitable for both residential & commercial use
• Protect, raise, or customise the flooring of your garage, carport, workshop, greenhouse, art studio, home gym, outdoor shower and more!
• Can be trimmed to fit your space or finish edges - see trimming note below
• Add a pack of Ramps & Corners to finish the edging of your install (not included)
• 12 Year Warranty

SPECIFICATIONS:
Pack size: 30 tiles
Colour: Grey
Singular tile size: 400mm x 400mm x 20mm
Singular tile weight: Approx. 500g
Coverage area: 4.8 square metres
Material: PP Polypropylene
Ambient temperature tolerance: -40°C - 80°C
Dispersed contact load rating: 3000kg per 4.8 square metres (please note, this load rating is dispersed across tiles, a small direct contact area eg. car jack holding the full weight of a car can cause cracking)

Trimming note: Measure & mark your tile. Following your guideline, use a table saw (preferred option) or circular saw with laminate or plastic cutting blade to cut tile. A tile cutter is also a great option if available. Trimming off the male or female connector edge will lose ability to connect more tiles or ramps (sold separately) to the trimmed side - trim the outer edge of your install to keep all other tiles connected securely.

Carton size: 45 x 45 x 62cm
Carton weight: 17kg