Call us 0800 800 880

Wall Mounted Patio Cover 4.8m x 3m Ironsand

Pre-order now, new stock arriving 8 May

NOW ONLY

$2,199

At 4.8m wide, this beautifully crafted wall mounted patio cover is the perfect option for larger outdoor areas.

Read more
29 people have this in their cart
Product overview

Product overview

At 4.8m wide, this beautifully crafted wall mounted patio cover is the perfect option for larger outdoor areas.

Create a sheltered spot next to the pool, weatherproof the barbecue area, turn your deck into an extension of your living room, or even use it as a carport; whatever you need a cover for, this wall mounted unit is up to the job.

The powder coated aluminium construction is guaranteed to look great for years to come and is designed to stand up to most sheltered New Zealand conditions. The stylish ironsand finish fits well with most outdoor areas and will definitely have the neighbours asking where you bought it from.

The 8mm twin-wall polycarbonate roof panels are UV stabilised to prevent yellowing and the twin-wall construction gives superior temperature control, keeping things cool in the summer by blocking UV rays, while still allowing plenty of light through. When the weather does turn, the built-in gutters feature hidden outlets through the foot of each pole, letting the water disperse without the need for ugly pipework everywhere.

Installation is straightforward, while maintenance is minimal, leaving you to get on with enjoying maximum time entertaining friends and family, or just watching the world go by from the shady comfort of your new patio cover.

It’s a stylish, sturdy and versatile way to maximise your time spent enjoying your outdoor areas, order yours today.

FEATURES
• UV stabilised, 8mm twin wall polycarbonate roof panels
• Powder coated aluminium frame
• Base plates and hardware included
• 2 Year Trade Tested Warranty

SPECIFICATIONS
Total dimensions: W 4.85m x D 3.0m x H 2.85m
Frame material: Aluminium, 1.5mm
Roof panel material: 8mm twin wall polycarbonate
UV rating: UV50+ (blocks over 98% of harmful UV rays)
Colour: Ironsand
Post dimensions: Front – 243cm x 9cm x 9cm, 1.5mm aluminium
Foot plate size: W 16cm x D 16cm x H 5.7cm
Weight net/gross: 79/93kg
Carton dimensions: Carton 1 – 298cm x 64cm x 14cm, 48kg. Carton 2 – 486cm x 44cm x 10cm, 45kg

Tools required for assembly: 1 spirit level, 1 measuring tape, 1 marker pen, 1 impact drill, 12mm socket wrench, 1 rubber mallet, 10-12mm open ended spanner, 4mm hexagon wrench, 1 screwdriver.

Can we help?

Our friendly and knowledgeable gurus are trained to answer all your questions as quickly as possible. So if there’s anything you need to know just give us a call during business hours, or send us an email any time.

0800 800 880
Customer questions

Questions and answers

0 votes
q: Hi can you tell me if this product is water tight where the edge of the pergola joins the wall or does it let water through?
a: As long as the surface it is being mounted to in perfectly flat, then it should be a snug fit, however you will generally need to seal it with a sealant appropriate the the construction of your house (polyurethane or silicon) to get it completely watertight. Feel free to give out sales team a call if you want to know more.
By Trade Tested on April 1, 2019
0 votes
q: What about attaching to a standard, single storey home with overhang/soffits? How is this achieved? Your photos show installation without these.....
a: You can attach it to your sofit, however your soffit will need to be reinforced appropriately behind using timber. We'd recommend getting a builder to advise on the best way to do this for your particular application.
By Trade Tested on March 26, 2019
0 votes
q: Hi, My basement is brick and first level is plaster. Will this spoil of affect my plaster as it has to be mounted on the plaster wall?
a: You will need to drill into the wall, so yes some damage will be done.
By Trade Tested on March 25, 2019
1 vote
q: Hi. Are these suitable for a coastal property? I.e. will they rust? And how high does the wall need to be for the back part (where it attaches to the wall)?
a: The frame is powder coated aluminium, so it wont rust. The wall mount rail attaches at 2760mm (this is the height that holes are drilled, the actually bracket extends 40mm above this), so your wall must be at least this high.
By Trade Tested on December 6, 2018
1 vote
q: Are these available in white?
a: Sorry, these are only available in our ironsand colour at the moment.
By Trade Tested on November 20, 2018
0 votes
q: How stable are they in very / extremely high windy conditions?
a: They are not designed for extreme weather conditions, we recommend installation in sheltered areas, Check out our customer reviews on this and other models for a better idea of how people are using them.
By Trade Tested on December 18, 2018
0 votes
q: The height is to high for my house. Can the post be cut with saw?
a: Yes you can modify the height with the right tools and know how. The instructions don't provide guidance on this, so the end result is up to the installer.
By Trade Tested on December 9, 2018
0 votes
q: Is it possible to adjust the angle of the roof?
a: These come with a fall of 5 degrees and any adjustment is not covered in the manual. However with the right know how it would be possible, you may need to create an angled wall mount or similar. Bear in mind this would be outside the original design, so any modifications would be outside our warranty coverage.
By Trade Tested on November 26, 2018
0 votes
q: How is it attached to the house. I can see from the photos how the base is secured. Thanks
a: It is attached using a bracket that screws to the building, the beams are them attached to this.
By Trade Tested on November 20, 2018
0 votes
q: Hello, is it feasibly possible to attach sides and front (the pvc curtain type) to this structure.
a: Yes that is definitely possible, but you may have to figure out your own way of attaching, you will also need to ensure you get the right sizes for the patio cover you choose.
By Trade Tested on November 13, 2018
-1 votes
q: Our deck is only about 2.8 m wide (out from the house) - is it possible to cut the structure and roof panels back from 3m to fit our deck?
a: Yes, we're sure it would be achievable with the right tools and know how. The instructions don't provide guidance on this, so the end result is up to the installer.
By Trade Tested on December 20, 2018
-1 votes
q: Do you need a permit to attach these to a house?
a: No you shouldn't need to, but we always recommend checking with your local council just in case.
By Trade Tested on November 21, 2018
-1 votes
q: Does the roof actually block the sun out?
a: No, the roof panels are transparent, not tinted, however they have a UPF50+ rated coating on them.
By Trade Tested on November 21, 2018
Customer reviews

Customer reviews

Overall rating

5 out of 5 stars from 10 reviews
Denis Auckland

Patio roof

about 1 month ago

2019-03-15T20:37:28+00:00

We had to slightly modify to fig our situation but worked out well. Easy to assemble. A+

Brittbritt Auckland

Highly reccomended

3 months ago

2019-01-13T11:38:01+00:00

This is a great product. As first home buyers we didn't have thousands to spend on a cover and were a bit skeptical about this one. However it was super easy to put up (make sure you read equipment needed before assembling) and has blown us away. It is super solid and standing up against a high wind area. I have already recommended to others to purchase. Now we are looking at purchasing patio blinds for the sides :)

Welly Mod Wellington

Adjusted to height

3 months ago

2019-01-12T08:09:20+00:00

Installed the patio cover just before Christmas. Shortened the posts to line up with an existing wall. Has stood up well to some strong Welly wind. Great product for the price.

Grump Otago

Bonza.

3 months ago

2019-01-10T13:47:25+00:00

I am gobsmacked at ease of erecting, and the great final effect.

Martina Kapiti Coast

Love it!!

4 months ago

2019-01-03T15:07:58+00:00

I bought the 4800x3 and it went over a wooden deck and attached to a wooden existing porch roof so the extra covered area is great. Instructiins were easy to follow. The only reason it took us a bit longer was due tonus having to cut the three posts down and redrill holes. The only advise i could give is before you start make sure you have screws to attach bracket and posts to any wooden structure since it only comes with dynabolts to fasten into concrete. We ended up using iron sand roofing screws we had lying around and the washers off the bolts so worked out great. Trade tested are alos great to deal with and even follow up with you to ensure you are happy with your purchase. 10/10

Na Manawatu

Wall mounted patio roof

4 months ago

2018-12-28T07:44:22+00:00

Very pleased with the wall mounted patio roof, very easy to erect and looks great

Delter Wellington

Wall mounted patio cover

6 months ago

2018-11-02T14:52:45+00:00

Easy to assemble only took 3 hrs by myself. Good looking product and no worries about stability in Wellington winds. Does not significantly block natural light. Excellent product, well recommended.

Happy Camper Nelson

Patio Cover - used as a Carport

8 months ago

2018-09-08T22:04:22+00:00

Great product, easy to install (even the 4.8m size) I only required help for 10 mins in order to hold the posts in place while connecting the first one or two cross stays, otherwise it was a straight forward one-man job.

Andrew Manawatu

Patio cover

10 months ago

2018-07-08T10:38:17+00:00

Super easy to build and all fittings and fixtures are of excellent quality. We even bought another . I recommend this product

Leggo Auckland

Wall mounted patio cover

about 1 year ago

2017-12-16T17:24:44+00:00

Good quality ,but the pre drilled holes were out so didn’t help when assembling it,not great, But looks good now up

Related categories