Get this great custom made wooden floor kit, guaranteed to fit perfectly in your new Trade Tested shed. Manufactured locally and made from FSC Certified New Zealand Pine, this great kit comes with everything you’ll need to create the perfect foundation and floor for your awesome new shed.
The floor is rebated to prevent any moisture damage and all the timber has been treated - rough-sawn H4 bearers and rough-sawn H3.2 floorboards. The kit also contains galvanised nails.
All timber is cut to size and takes very little time to build.
• H4 Bearers (rough-sawn)
• H3.2 Floorboards (rough-sawn)
• Galvanised nails/nail plates
Bearers: 1535mm x 75mm x 50mm (6)
Floorboards: 735mm x 150mm x 19mm (20)
Nails: 60mm x 2.8mm (126)
Nail plates: 6T5 180mm x 34mm (6), 6T10 180mm x 68mm (3)
Our friendly and knowledgeable gurus are trained to answer all your questions as quickly as possible. So if there’s anything you need to know just give us a call during business hours, or send us an email any time.
Garden Shed Wooden Floor Kit 3.07m x 0.79m
about 1 year ago2018-01-07 04:07:20
follow the instructions and easy as
Split bearers make for lots of fiddling.
about 1 year ago2017-12-16 20:17:21
I bought this floor kit for a matching 3.07 x 0.79 shed. It does the job, however, could be much better. The base bearers are split to half the shed length (approx 1.5m). The bearer split is at the center of the doors for the matching shed. This means if your ground is not perfectly level, warping will occur at the shed doors making the doors hard to align. Also, in my case, the bearers were slightly different widths which meant warping even on level ground and lots of shimmying to get the shed doors sitting right. You also need to purchase some nail plates (not included) to join the bearers. It would be much easier to just use full length 3.07m bearers and avoid all such problems. The shed is awesome, but ask for floor plans and build your own base.