This controller is used to automatically control the function of electric water pumps. It can guarantee the optimum control of pumps used in plumbing systems. Being an intelligent mix of hydraulic and electronic engineering, the control maintains both pressure and flow and controls the operation of the pump automatically. It needs no pressure tank as in the traditional systems. There are no plenum chambers to recharge and no irritating variation in pressure and in flow at the point of use. No adjustment or maintenance is required. It is absolutely dependable, durable and simple to install.
Functioning: The unit is programmed to perform all the pump control operations automatically. When particular operational breakdowns occur, such as water failure, obstruction of the suction pipe, etc, the unit recognises the breakdown and a red LED Failure lights up. At the same time a stop signal is sent to the pump to prevent damage caused by it working in the absence of water. After rectifying the cause of the failure, the system can be restarted by pressing the Reset button.
Application: Self-Priming Pump/Jet Pump/Garden Pump/Clarified water pump
• Automatic pressure control
• R1” connector
• IP65 weather protection
• 2 power cables – 0.5m, 1.5m
• 1 Year Trade Tested Warranty
Rated voltage: 220V-240V
Max. current: 10A
Max. power: 1.1KW
Starting pressure setting: 1.3bar
Max. working pressure: 10bar
Connection thread: R1"
Protection rating: IP65
Max.working temperature: 55℃
Wiring requirement: 7.5-9mm
Package size: 26cm x 26cm x 26cm
Our friendly and knowledgeable gurus are trained to answer all your questions as quickly as possible. So if there’s anything you need to know just give us a call during business hours, or send us an email any time.
EPC-1 pressure controller
about 1 month ago2018-04-05 19:55:19
Very good product, works well. We now have smooth control over the pump